Underfloor heating

Underfloor heating that works with the whole system.

Wet underfloor heating depends on the heat source, manifold, controls, flow rates and individual loops working together. We start by understanding how the system is arranged and where performance is falling short.

Gas Safe Register

Gas Safe registeredRegistration 633795

Wet underfloor heating pipework being installed in a UK home renovation
Local supportSouth East London & Kent

Where we can help

Underfloor-heating work we can help with

Start with the symptoms. A proper check is the reliable way to find the cause and avoid replacing parts on guesswork.

01New wet underfloor-heating installations
02Zones that stay cold or warm unevenly
03Manifold, actuator and control problems
04Flow-rate and circulation concerns
05Existing systems after renovation or extension work
06Heating that takes too long to respond

The RP approach

Treat the manifold, controls and heat source as one system

Professional heating work should leave you clearer about your system—not more confused by it.

01

System-level diagnosis

Zones, thermostats, actuators, flow meters and the heat source are considered together rather than adjusting settings blindly.

02

Clear zoning

Control behaviour and zone response are checked so you understand which part of the system is causing the problem.

03

Practical installation planning

For new systems, floor build-up, heat demand, pipe layout and controls need to be considered before work starts.

What happens next

A simple, clear process

From the first call to the agreed work, the aim is to keep the next step easy to understand.

  1. 01

    Understand the system

    Share the property layout, heat source and which rooms or zones are affected.

  2. 02

    Check flow and controls

    The manifold, controls and relevant circulation are assessed to narrow down the cause.

  3. 03

    Agree the fix or installation plan

    The recommended next step is explained before repair or installation work proceeds.

Useful to know

Underfloor heating questions

Clear answers before you book.

Why is one underfloor-heating zone cold?

A single cold zone can point to its thermostat, actuator, loop flow or local controls rather than the whole system.

Can you help with an existing wet underfloor-heating system?

Yes. Describe the heat source, manifold and which zones are affected so the relevant checks can be planned.

Should I change manifold flow settings myself?

Not without understanding the system design. Different loops can require different flow rates, so arbitrary adjustments can make balancing worse.

Related advice

Understand the symptom before the visit

Use these guides to understand common causes and the basic checks worth making safely before you arrange work.

Local coverage

Where this service is available

Start with the main local areas below or open the full coverage map. Availability is confirmed from the postcode and type of work required.

Speak to a local engineer

Need help with underfloor heating?

Call with your postcode and a quick description of the problem. You will get a clear, practical next step.

CallWhatsApp