Heating advice
Why does my boiler keep losing pressure?
A boiler that repeatedly loses pressure may have a leak somewhere in the heating system, a problem with the expansion vessel or an issue with the pressure-relief valve. Repressurising may restore operation temporarily, but recurring pressure loss should be investigated rather than repeatedly topped up.

Gas Safe registeredRegistration 633795

Quick answer
Why does my boiler keep losing pressure?
A boiler that repeatedly loses pressure may have a leak somewhere in the heating system, a problem with the expansion vessel or an issue with the pressure-relief valve. Repressurising may restore operation temporarily, but recurring pressure loss should be investigated rather than repeatedly topped up.
Possible causes
What could be behind it?
Symptoms can overlap, so this is a starting point rather than a remote diagnosis.
Before you call
Safe checks worth making
Keep the checks simple. Do not remove sealed covers, alter gas components or carry out electrical or refrigerant work yourself.
- 01
Check the pressure reading when the boiler is cold
- 02
Look for obvious water around radiators, valves and accessible pipework
- 03
Note whether pressure falls slowly or after the heating runs
- 04
Keep any fault code or warning shown on the boiler
When to get help
Know when to stop checking and get it diagnosed
If the pressure keeps dropping after the system has been repressurised, or you can see water escaping, the underlying fault should be diagnosed.
Local support
Need help in South East London?
These guides support the diagnosis, but the actual system and property still matter. Check the main coverage areas below.
Useful to know
Related questions
Clear answers without pretending every system behaves the same way.
Is it normal to top up boiler pressure regularly?
No. An occasional adjustment can be needed, but repeated pressure loss usually points to an underlying issue that should be checked.
Can low boiler pressure stop the heating?
Yes. Many boilers will stop operating or show a fault when system pressure falls below the required range.
Speak to a local engineer
Still not sure what the system is doing?
Call with your postcode and a quick description of the problem. You will get a clear, practical next step.
